CHF 142.00 – CHF 362.00
The extension panel is suitable for all areas of extension: commercial furnishings, trade fairs, yachts, expedition vehicles, campers. And of course it has the same good technical properties as all Queens: just read the technical information.
The weight of the Queenply is around 320 – 350 kg/m³. It has a high screw pull-out strength and particularly good stability due to the multiplex structure. This makes it easier for you to work with and causes less sweat to come out of your face.
The expansion plate is stable, the surface is pressure and scratch resistant and easy to clean. In order to achieve a better surface smoothness and a low thickness tolerance, we have calibrated the carrier plate in all thicknesses (12 mm, 15 mm and 18 mm) to an accuracy of 0.2 mm.
The lightweight panel has a 0.6 mm hard-wearing HPL on both sides (no CPL or melamine!) and everything is of course waterproof glued using our PUR hot melt process.
By the way, we take good care of the panels and deliver the elements to you with a transport protection film on both sides
Plywood multiplex beams such as the Queenply HPL – do not have the same surface properties as chipboard or MDF substrates. Any surface irregularities that may occur are in the nature of the substrate and are not grounds for complaint. Minimal defects due to production or materials that do not affect the product quality and are permissible within the first choice are assessed according to the sorting regulations based on DIN EN 438 and the international ISO standard.
We also take great care to ensure that the Queenply panels you order leave our factory in perfect condition and arrive at your home undamaged. You can rely on that! However, we would also like to point out that any distortion of the panels caused by transport or further storage is not grounds for complaint.
Please also note that the HPL color displayed on your screen may differ slightly from the original color! If you have any questions, please contact us.
If you process our lightweight panels, please ensure that you take adequate safety measures, such as extracting the chips and wearing safety goggles and a protective mask. Due to the low weight, processing Queenply results in increased dust development.
And another important note: We pack your expansion panels particularly carefully before shipping and make sure that they leave our warehouse without any damage to the edges. But even with the greatest care, it can happen during transport that a corner is dented or the edge is slightly damaged. We know that too. That's why we calculate 1 cm less for each side of every Queenply expansion panel in advance: 249 cm × 121 cm for the raw panel, 243 cm × 121 cm for all composite elements and 247 cm × 120 cm for all veneered panels. This saves us all a lot of time that would otherwise be spent on complaints. Instead, invest this time in your project - and feel free to recommend us to others.